Edimax BR-6228nC specifications

Edimax BR-6228nC
8.3 · 1
Edimax BR-6228nC specifications, prices, product images and videos.

BR-6228nC | BR-6228NC
4710700927328, 649659019553, 0649659019553
EN - 147 (PDF)
Ethernet LAN
Full duplex
Ethernet LAN data rates10, 100 Mbit/s
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Cabling technology10/100Base-T(X)
VPN supportIPSec/PPT
Ethernet LAN interface typeFast Ethernet
DHCP client
DHCP server
Supported network protocolsPPPoE/Static IP/PPTP/Dynamic IP/ L2TP
Universal Plug and Play (UPnP)
Antenna gain level (max)3 dBi
Antennas quantity1
Antenna designExternal
Management features
Web-based management
Reset button
Quality of Service (QoS) support
Ports & interfaces
Ethernet LAN (RJ-45) ports4
DC-in jack
Security algorithms128-bit WEP, 64-bit WEP, WPA-PSK, WPA2-PSK
MAC address filtering
DMZ support
NAT functionalityNAT/NAPT IP
DoS attack prevention
Stateful Packet Inspection (SPI)
Weight & dimensions
Weight- g
Width134 mm
Depth110 mm
Height26 mm
Wireless LAN features
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 4 (802.11n)
WLAN data transfer rate (max)150 Mbit/s
Other features
WLAN data transfer rates supported150 Mbit/s
Filtering descriptionURL
Input current1 A
Rack mounting
Networking featuresFast Ethernet
Input voltage5 V
Bandwidth2.4 GHz
xDSL connection
Mobile network connection
Flash memory4 MB
Internal memory16 MB
CertificationCE, FCC
Operational conditions
Operating temperature (T-T)0 - 45 °C
Operating relative humidity (H-H)10 - 90 %
LED indicatorsLAN, Link, Power, WAN, WLAN
Product colourWhite
Packaging content
AC adapter included
Cables includedLAN (RJ-45)
Quick start guide
Mobile network
Mobile network generation4G
WAN connection
Ethernet WAN
- Complies with 802.11b/g and compatible with 802.11n standards;
- Increase the wireless speed up to 6 times faster and extends the coverage 3 times further;
- Supports WISP (Wireless ISP) connection mode;
- Supports Green technology for power saving;
- Includes EZmax multi-language setup wizard for internet connection, wireless settings and firmware upgrade;
- Supports WEP, WPA, WPA2, DDNS, DMZ, Virtual Server, QoS and DHCP.

Wireless Green Technology

Edimax BR-6228nC implemented the latest wireless green technology which could save energy by detecting the usage of wireless transference. It could supply the right amount of power to reach each connected wireless device when they are performing data transmission and save up to 74% of the power consumption. When in full loading, BR-6228nC could also save 50% power consumption than non-green solution routers.

Impressive Data Transmission Rate via IEEE802.11n

Edimax BR-6228nC is a high speed solution that complies with wireless IEEE 802.11b/g, and is compatible with IEEE 802.11n standard. When fine-tuned to operate using the wireless 802.11n technology, BR-6228nC wireless data transmission rate can reach up to 150Mbps – a coverage 3 times better than a standard 802.11g/b router. BR-6228nC is truly a high performance and cost-effective solution for your home and small business environments.

Extensive Internet Connection Sharing

With the built in NAT (Network Address Translation) function , the Edimax BR-6228nC allows up to 253 wired or wireless clients to simultaneously share an Internet connection.

Flexible WISP ( Wireless Internet Service Provider) Connection Mode

Wireless connection from your broadband router to an ISP’s Access Point is also possible. When the BR-6228nC is assigned to perform such task, it repeats the signal from a wireless Internet Service Provider to your home or office, simultaneously allowing connection of both wired and wireless stations to the Internet.

Easy & Multilingual Setup Installation CD

A unique multilingual Setup Wizard is provided in the installation CD. By simply following the animated installation procedures, connection of your router to the Internet is done within minutes!

WPS (Wi-Fi Protected Setup) Button

Edimax BR-6228nC supports you to build the connection between wireless network client and the router by simply pressing the WPS button on the wireless client and the router. No need to set up and configure the security on a wireless network.