Other trademarks are the property of their respective owners. Maximum wireless signal rate derived from IEEE Standard 802.11g and
802.11n specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network
trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will
adversely aect wireless signal range. Product specications, size and shape are subject to change without notice, and actual product
appearance may dier from that depicted on the packaging. Visit dlink.com (US) or dlink.ca (Canada) for more details.
Version 1.0 | July 20, 2010 6DCS930LQ.01G
Package Contents
DCS-930L Wireless N Network CameraCamera Stand and Mounting KitCAT-5 Ethernet CablePower AdapterCD with drivers and software
• Computer with Microsoft Windows® 7, Vista®, or XP
• PC with 1.3GHz or above; at least 128MB RAM
• Internet Explorer 6 or above , Firefox 3.5 or above, Safari 4 or above, Chrome 2 or above
• Existing 10/100 Ethernet-based network or 802.11n wireless network
System Requirements
Installation
Step 1:
Connect the included Ethernet cable to the network cable connector located on the
bottom panel of the DCS-930L and attach it to the network.
Step 2:
Attach the external power supply to the DC power input connector located on the
bottom panel of the DCS-930L and connect it to your wall outlet or power strip. Power is
conrmed when the green LED Power Indicator located below the lens is lit.
Step 3:
Insert the DCS-930L Driver CD in the CD-ROM drive. If the CD Autorun function does
not automatically start on your computer, go to Start> Run. In the run box type
D:\autorun.exe (where D: represents the drive letter of your CD-ROM drive) and click
OK. When the autorun screen appears, click Install and follow the on-screen instructions.
Step 4:
Click on the Start button to start the wizard, and follow the instructions from the Installation
Wizard to nish setting up your camera.
Alternatively, you may create a WPS connection if your router or access point supports
WPS. To create a WPS connection:
Step 1:
Press and hold the WPS button on the side of the camera for three seconds. The blue WPS
status LED above the button will blink.
Step 2:
Press the WPS button on your wireless router or access point within 60 seconds. On some
routers, you may need to log into the web interface and then click an onscreen button to
activate the WPS feature. If you are not sure where the WPS button is on your router or
access point, please refer to your router’s user manual.
The DCS-930L will automatically create a wireless connection to your router. While
connecting, the green LED will ash and your camera will reboot.
WPS Setup
After registering your DCS-930L camera with a mydlink account in the Camera Installation
Wizard, you will be able to remotely access your camera from the www.mydlink.com
website. After signing in to your mydlink account, you will see a screen similar to the
following:
Step 1:
Open Internet Explorer and go to http://www.mydlink.com, then sign into mydlink.
Step 2:
Select your camera from the device list, and your camera’s Live View will appear.
mydlink Portal
View the manual for the D-Link DCS-930L here, for free. This manual comes under the category Security cameras and has been rated by 3 people with an average of a 6. This manual is available in the following languages: English. Do you have a question about the D-Link DCS-930L or do you need help? Ask your question here
Do you have a question about the D-Link and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other D-Link owners to provide you with a good answer.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the D-Link DCS-930L below.
What is the weight of the D-Link DCS-930L?
The D-Link DCS-930L has a weight of 76.9 g.
What is a megapixel?
The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.
What does the abbreviation 'MP' stand for?
MP stands for MegaPixels.
What certifications does the D-Link DCS-930L have?
The D-Link DCS-930L has the following certifications: FCC B, IC, C-Tick, CE.
Is the manual of the D-Link DCS-930L available in English?
Yes, the manual of the D-Link DCS-930L is available in English .
Need help?
Do you have a question about the D-Link and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other D-Link owners to provide you with a good answer.
Number of questions: 0