Casio Twin Sensor SGW100-1V manual

Casio Twin Sensor SGW100-1V
8.5 · 14
PDF manual
 · 5 pages
English
manualCasio Twin Sensor SGW100-1V

Operation Guide 3157

1
MO1105-EC

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of yourpurchase, be sure to read this manual carefully.ApplicationsThe built-in sensors of this watch measure direction and temperature. Measuredvalues are then shown on the display. Such features make this watch useful whenhiking, mountain climbing, or when engaging in other such outdoor activities.Warning!The measurement functions built into this watch are not intended for use in takingmeasurements that require professional or industrial precision. Values producedby this watch should be considered as reasonably accurate representations only.When engaging in mountain climbing or other activities in which losing your waycan create a dangerous or life-threatening situation, always be sure to use asecond compass to confirm direction readings.Note that CASIO COMPUTER CO., LTD. assumes no responsibility for anydamage or loss suffered by you or any third party arising through the use of thisproduct or its malfunction.About This ManualDepending on the model of your watch, display textappears either as dark figures on a light background orlight figures on a dark background. All sample displaysin this manual are shown using dark figures on a lightbackground.Button operations are indicated using the letters shownin the illustration.Each section of this manual provides you with theinformation you need to perform operations in eachmode. Further details and technical information can befound in the “Reference” section.
(Light)
(Light)
General Guide
The illustration below shows which buttons you need to press to navigate between
modes.
In any mode (except when a setting screen is on the display), press B to illuminate
the display.
You can enter the Digital Compass/Thermometer Mode from the Timekeeping Mode
by pressing D. To enter from another mode, first use C to enter the Timekeeping
Mode, and then press D.
Stopwatch Mode
World Time Mode
Countdown Timer
Mode
Alarm Mode
Press C.
Timekeeping Mode
Digital Compass/
Thermometer Mode
Press D.
Press C.
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
Read This Before You Set the Time and Date!
This watch is preset with a number of city codes, each of
which represents the time zone where that city is located.
When setting the time, it is important that you first select
the correct city code for your Home City (the city where
you normally use the watch). If your location is not
included in the preset city codes, select the preset city
code that is in the same time zone as your location.
Note that all of the times for the World Time Mode city
codes are displayed in accordance with the time and
date settings you configure in the Timekeeping Mode.
Day of week
Month – Day
Hour : Minutes
Seconds
To set the time and date
1. In the Timekeeping Mode, hold down A until the city code starts to flash, which
indicates the setting screen.
2. Use D and B to select the city code you want.
Make sure you select your Home City code before changing any other setting.
For full information on city codes, see the “City Code Table”.
3. Press C to move the flashing in the sequence shown below to select the other
settings.
Second
Hour
12/24-Hour
Format
Minute
Year
Month
Day
Temperature
Unit
City Code
DST
The following steps explain how to configure timekeeping settings only.
4. When the timekeeping setting you want to change is flashing, use D and/or B to
change it as described below.
To do this:
Change the city code
Toggle between Daylight Saving Time
(
) and Standard Time ( ).
Toggle between 12-hour (
12H
) and
24-hour (
24H
) timekeeping.
Reset the seconds to
00
Change the hour or minute
Do this:
Use D (east) and B
(west).
Press D.
Press D.
Press D.
Use D (+) and B (–).
Screen
5. Press A to exit the setting screen.
For details about configuring temperature display settings, see “To specify the
temperature display unit”.
See “Daylight Saving Time (DST) Setting” below for details about the DST setting.
Use D (+) and B (–).Change the year
Change the month or day
Daylight Saving Time (DST) Setting
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To toggle the Timekeeping Mode time between DST and Standard Time
1. In the Timekeeping Mode, hold down A until the city
code starts to flash, which indicates the setting screen.
2. Press C once and the DST setting screen appears.
3. Press D to toggle between Daylight Saving Time (
ON
displayed) and Standard Time (OFF displayed).
4. Press A to exit the setting screen.
The DST indicator appears to indicate that Daylight
Saving Time is turned on.
DST indicator
On/Off status
Digital Compass/Thermometer
You can take direction readings and temperature readings in the Digital Compass/
Thermometer Mode.
Direction readings are taken by the watch’s built-in magnetic bearing sensor and
displayed as one of 16 directions. A temperature sensor is used for temperature
readings.
See “Digital Compass” for more information about the digital compass.
See “Thermometer” for more information about the thermometer.
To enter and exit the Digital Compass/Thermometer Mode
1. While in the Timekeeping Mode, press D to enter the
Digital Compass/Thermometer Mode.
The watch will start to take direction and temperature
readings. After about two seconds, the direction that
the 12 o’clock position of the watch is facing will be
indicated and the current temperature reading will
appear on the display.
Direction readings will be taken each second for about
10 seconds, and then stop automatically.
Temperature readings will be taken every two
seconds for about 10 seconds, and then stop
automatically.
To perform direction and temperature readings for
another 10 seconds, press D again.
2. Press C to return to the Timekeeping Mode.
For information about using the digital compass, see “To
take a direction reading”.
For information about using the thermometer, see “To
take a temperature reading”.
12 o’clock position
Current time
During readings
About two
seconds
Thermometer
The watch takes temperature readings automatically whenever you enter the Digital
Compass/Thermometer Mode. In addition, you can take readings manually by
performing the procedure below.
You can calibrate the temperature sensor if you think readings are wrong for some
reason.
You can select either Celsius (°C) or Fahrenheit (°F) as the temperature unit.

View the manual for the Casio Twin Sensor SGW100-1V here, for free. This manual comes under the category sport watches and has been rated by 14 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Casio Twin Sensor SGW100-1V or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Casio Twin Sensor SGW100-1V sport watch is a versatile and functional device designed for outdoor enthusiasts. It features a 12h/24h clock mode and a calendar, allowing users to keep track of date and time. With its stopwatch and world time function, tracking activities and travel becomes effortless. Additionally, the watch is equipped with a thermometer, which displays temperature in either Celsius or Fahrenheit. Constructed with a resin band, the watch is lightweight, weighing only 55 grams. Featuring an electronic compass and an LCD dial type, it provides easy readability. It comes with dimensions of 51.5 x 47.6 x 13.2 mm. Powered by a CR2025 battery, the watch has a water-resistant depth of up to 200 meters. The Casio Twin Sensor SGW100-1V is durable and reliable due to its premium materials. While the watch is not waterproof, it can withstand splashes of water and light rain. Perfect for outdoor activities such as hiking, camping, and trekking, the watch offers robust functionality and practicality.

General
BrandCasio
ModelTwin Sensor SGW100-1V | SGW100-1V
Productsport watch
EAN370309020765, 79767898441, 797678984410, 0370309020765, 0797678984410, 0079767898441
LanguageEnglish
FiletypeManual (PDF)
Technical details
WaterproofNo
CalendarYes
Clock mode12h/24h
StopwatchYes
Accuracy+/- 20 sec/month
World time functionYes
ThermometerYes
Water resistant depth200 m
Timer1min - 24h
Electronic compassYes
Watch dial typeLCD dial
Other features
Dimensions (WxDxH)51.5 x 47.6 x 13.2 mm
Product colourBlack
Weight & dimensions
Weight55 g
Design
Band materialResin
Power
Battery typeCR2025
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio Twin Sensor SGW100-1V below.

What is the weight of the Casio Twin Sensor SGW100-1V?

The Casio Twin Sensor SGW100-1V has a weight of 55 g.

Do I need to switch off my sport watch at night?

It is sensible for you to switch off your sport watch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

How much should I exercise as an adult per week?

As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.

How high is an adult's heart rate at rest?

An adult's resting heart rate is between 60 and 100 beats per minute.

What is an adult's maximum heart rate?

As a rule of thumb for your maximum heart rate, you can use 220 minus your age.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Is the manual of the Casio Twin Sensor SGW100-1V available in English?

Yes, the manual of the Casio Twin Sensor SGW100-1V is available in English .

Is your question not listed? Ask your question here

No results